Restube automatic Mode D'emploi page 22

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 26
#2
#3
#4
#5
22
Empty the buoy completely (#2)
Open the cap of the mouthpiece.
To release the gas from the buoy, plug the back of the cap
into the oral valve.
Fully release gas by folding or rolling the buoy.
Close the cap of the oral valve.
Longitudinal fold (#3)
Spread out the buoy so that the trigger mechanism is in
the top left.
Fold up the bottom part of the buoy along the horizontal
dotted line.
Tuck the folded part of the buoy under the CO2 cartridge so
that the oral valve folds away to the left.
Zigzag fold (#4)
Turn the buoy so that the trigger mechanism is facing
upward.
Fold over the bottom end of the buoy to the back along
the first solid line.
NOTICE
The words "Oben/Top/Haute" must be visible.
Fold over the next part to the front along the dotted line
Continue until you reach the trigger.
The buoy is correctly folded if the CO2 cartridge is on the
outside.
The last fold must be to the back.
Wrapping the safety leash around the buoy (#5)
Hold the folded buoy firmly in one hand.
Use the free hand to wrap the safety leash exactly once
around the buoy and the back end of the CO2 cartridge.
NOTICE
Do not wrap the remaining safety leash further around the buoy –
store it behind the CO2 cartridge in the pocket.
Attach the safety leash to the white velcro 5c.
Pack away the folded buoy into the pocket.

Publicité

Table des Matières
loading

Produits Connexes pour Restube automatic

Table des Matières