Operation And Maintenance; Placement Of Restube Automatic - Restube automatic Mode D'emploi

4. Operation and maintenance
Check the product's readiness for use (trigger and cartridge) be-
fore each use!
•
•

4.1 Placement of RESTUBE automatic

Position or attach Restube so that it is easily reached / Attach it to your equipment or
your drone.
If required, detach the Restube and throw it at or to your target.
NOTICE
Open the pocket and verify that the green securing clip is
attached to the side of the trigger mechanism.
>>>If the securing clip is missing, the CO2 cartridge
may be empty. In this case, unscrew the CO2 cartridge.
>>>If the cartridge is pierced at its opening, it is empty
and must be replaced.
Verify that the buoy is in the correct position in the pocket.
>>>The nut on the trigger mechanism must face the
label with the nut symbol sewn into the pocket.
19