TERMA DRL E-Comfort MEG 1.0 wit Mode D'emploi page 26

REG 3
Temperature regulation ring with
temperature setting indicators:
When the device is turned on, it heats the
radiator up to the set temperature. Having
reached that temperature, the device will
turn on and off regularly in order to main-
tain it.
The construction of the device as well as
the physical characteristics of the heating
agent inside the radiator, influence the way
in which the heat is distributed — the tem-
perature of the bottom pipes on the radia-
tor (especially the two located at the very
bottom of the radiator) may be lower than
the temperature of the remaining parts of
the radiator — this is a normal phenomenon.
26
User manual MEG, DRY, MOA, REG 2, REG 3
50° 65°
Emergency situations
Should you discover any abnormalities in the
way the device is operating, please check if:
• The device is correctly connected to the
installation.
• The radiator is correctly filled with the
appropriate heating agent.
If the heating element unit is still not work-
ing correctly, it should be uninstalled and re-
turned to the supplier.