Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installation or removal
Detailed information demonstrating the dif-
ferent ways of installing or removing a radi-
ator heating element is available from the
manufacturer or importer (see footnotes at
the end of the manual). Below we list some
basic requirements and principles which
must be followed to ensure long term, re-
liable operation of the product.
8% ( 20°C )
When installing the heating element hor-
izontally, the single tube (capillary) where
the temperature sensor is located, should
be positioned to be as close to the bottom
of the radiator as possible.
EN
Before installation or first use:
1. Read the chapter Safety requirements
— Installation.
2. Fit the heating element using the cor-
rect spanner (size
3. The heating element must be installed
at the bottom of the radiator, perpen-
dicular to the radiator pipes, while pre-
serving space for the proper circulation
of the heating medium.
4. Use a suitable heating medium for fill-
ing the electric radiator, i.e. (water, spe-
cial products based on water and glycol
for use in central heating systems, or oil
which complies with the requirements
of the manufacturer of the radiator and
heating element).
5. Check the distances between the indi-
vidual heating element tubes and bend
if necessary.
150°
22).
5 mm
2-3 mm
11
Publicité
Table des Matières
