WAGNER CONTROL SPRAY DOUBLE DUTY Guide De Démarrage Rapide page 4

Assembly
Start
Before you begin:
NEVER point the spray gun at any
part of the body.
Questions?
Call Wagner Technical Service at:
1-800-328-8251
Register your product online at:
www.wagnerspraytech.com
English
1
1. Align the arrow on the spray gun with
the "unlock" symbol on the turbine.
Aligning the suction tube
If you are going to be spraying in a
downward direction, the angled end of the
suction tube should be pointing toward the
front of the gun.
4
2
2. Insert and twist the spray gun into
the turbine toward the "lock" symbol
on the turbine. The tab below the
trigger will lock the two pieces into
place.
If you are going to be spraying in an upward
direction, the angled end of the suction tube
should be pointing toward the rear of the
gun.
Note: By pointing the
suction tube in the
proper direction, you
will not have to refill the
container as often.
IMPORTANT: Never
tip the sprayer at
more than a 45°
angle. Material could
get into the turbine
and damage the
sprayer.