Charging The Battery - Eschenbach QUUICKLOOK ZOOM Mode D'emploi

Charging the battery

Quicklook Zoom is supplied with the battery partially charged. We
recommend that you charge it for three hours or until the red charge
control indicator goes out before use.
Plug the power supply into a wall socket and insert the connector
into Quicklook as shown in the diagram.
The red light beside the power connector should illuminate indicating
that the battery is being charged. The light will go off when the battery
is substantially charged. It takes about three hours to charge the
battery from a discharged state. Additional charging will not cause any
damage to the unit. Quicklook Zoom can be used while the battery is
being charged.
Operation
- 14 -