Eschenbach QUUICKLOOK ZOOM Mode D'emploi page 18

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 22
Press Freeze/Brightness to cancel a choice and exit the menu.
The Advanced menu contains options that are used only
occasionally.Hold the Mode button in for 6 seconds to bring up
this menu (ignore the icon that appears after 3 seconds – it will be
replaced with the Advanced menu). The Advanced Menu contains
these options. Please note that some of the icons will have a
tick mark or an X through them. If there is a tick is over the icon,
selecting it will enable that option; an X will disable the option.
The Colour Mode Menu:
Brightness – Use the Zoom-up and Zoom-down but-
tons to adjust the image brightness. Press Mode to
accept the new setting.
Contrast – As with brightness above use the Zoom-up
and Zoom-down buttons to adjust the contrast of the
image.
Saturation –This controls the richness of the colour
in the image.
Exit – Exit the menu.
The Reading Mode Menu:
Colour selection – Here you can change
the semi-colours used in the reading
modes. The icon on the right will appear
while selecting the colours. Press the
Zoom-up button to change the ink col-
- 18 -

Publicité

Table des Matières
loading

Table des Matières