addi Quick hobby Mode D'emploi page 17

Twist off the black tip (a) from the
1
addiQuick Hobby. Beneath it you will
find the quick release connector (b), which
holds the felting needle.
Also twist off the screw from the
2
quick release connector, pull out the
felting needle insert the desired needle.
Now screw the screw for the quick
3
release connector back in, turning
clockwise. Finally, screw the tip of the addi-
Quick Hobby back on.
Insert the Needle
a
b
The needle insertion depth is variable,
depending on how deeply you insert the
needle into the quick release connector
(min 15 to max 25 mm).
TIP!
Take some time to see which needle and
which needle position works best for you.
Everyone felts differently!
b
17