Safety Instructions For Maintenance; Possible Malfunctions - Bartscher 200270 Mode D'emploi

6.3 Safety instructions for maintenance

o Inspect the power cable regularly for damage. Never use the device if the cable is
damaged. If the power cable is damaged, have an authorised service center or
qualified electrician replace it.
o In case of damage or malfunction, please contact your stockist or our customer
service centre. Pay attention to the troubleshooting tips in pt. 7.
o Only a qualified technician and using original spare parts and accessories should
carry out repairs and maintenance of the device. Do not attempt to repair the
device yourself.

7. Possible Malfunctions

In case of malfunction inspect the device according to the following table:
Problem
No cooling
Insufficient
cooling power
Possible cause
• Plug improperly inserted
into socket.
• The device is not turned on.
• Safety fuse has discon-
nected power source.
• Power outage.
• Damaged temperature
controller.
• The device is near a heat
source or exposed to
direct sunlight.
• Poor air circulation in the
device.
• Food products inside the
device are too hot.
• The device is overfilled.
Solution
• Remove plug and reinsert
properly into socket.
• Turn the device on with use of
ON/OFF switch.
• Check fuses, connect device
to another socket.
• Check power supply
• Contact a sales agent
• Ensure sufficient distance
between the device and heat
sources.
• Ensure sufficient distance
between the device and walls
or other objects.
• Allow food products to cool
before placing them in the
device.
• Try to remove some products
from the device.
- 31 -