Sony CDX-GT705DX Mode D'emploi page 7

E GP*
1 /ALBM* 2 +/– buttons*
To select preset stations/skip groups (press);
skip groups continuously (press and hold).
F MENU button
To enter menu.
G Display window
H BBE MP button 2, 10, 11
To activate the BBE MP function.
I OPEN button 5
J IMAGE button 2
To select the display image.
Movie mode 1-3 t Spectrum analyzer
mode 1-5 t Space Producer mode t Wall
paper mode 1-3 t normal play/reception
mode
K DSPL (display) button 8
To change display item.
L ENTER button
To complete a setting.
M SOURCE button
To power on/change the source (Radio/CD/
MD* 5 /AUX/SAT* 6
N MODE button 8, 15
To select the radio band (FM/AM)/select the
unit* 4 .
O Number buttons
Radio:
To receive stored stations (press); store
stations (press and hold).
CD/MD* 5 :
(1): REP 8, 15
(2): SHUF 8, 15
(6): PAUSE*
7
To pause playback. To cancel, press again.
P SCRL (scroll) button 8
To scroll the display item.
Q HDEQ button 9, 10
To select an equalizer type (Flat, Xplod,
Refined Vocal, Over Drive, Virtual Sub,
Natural Cruise or Rear Drive)
3
).
R RESET button 4
S Z (eject) button 5
To eject the disc.
T Disc slot 5
To insert the disc.
The following buttons on the card remote
commander have also different buttons/functions
from the unit.
wa </, (SEEK –/+) buttons
To control CD/Radio, the same as (SEEK)
–/+ on the unit.
ws VOL (volume) +/– button
To adjust volume.
wd ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
wf SOUND button
To select sound items.
wg LIST/CAT*
button 9, 16
6
To list up.
wh M/m (+/–) buttons
To control CD, the same as (GP/ALBM) +/–
on the unit.
*1 When an ATRAC CD is played.
*2 When an MP3/WMA is played.
*3 If the changer is connected, the operation is
different, see page 15.
*4 When a CD/MD changer is connected.
*5 When an MD changer is connected.
*6 When the SAT tuner is connected.
*7 When playing back on this unit.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless (SOURCE) on the unit is pressed, or a disc is
inserted to activate the unit first.
Tip
For details on how to replace the battery, see
"Replacing the lithium battery of the card remote
commander" on page 19.
7