Customer Service And Spare Parts; Technical Information - Electrolux IK 2750 10 RE Mode D'emploi

To carry out complete defrosting of the freezer
compartment
1. Press button ON/OFF (I) ;
2. leave the door open, insert the plastic scraper in
the appropriate seating at the bottom centre,
placing a basin underneath to collect the defrost
water;
3. when defrosting is completed, dry the interior
thoroughly and refit the plug; keep the scraper for
future use;
4. Press button ON/OFF (I). After letting the
appliance run for at least half an hour, replace
the previously removed food into the
compartment.
Important:
Never use sharp metal tools to scrape off frost
from the evaporator as you could damage it.
Do not use a maechanical device or any artificial
means to speed up the thawing process other
than those recommended by the manufacturer.

CUSTOMER SERVICE AND SPARE PARTS

If the appliance is not functioning properly, check
that:
• the plug is firmly in the wall socket and the mains
power switch is on;
• there is an electricity supply (find out by plugging
in another appliance);
• If there are water drops on the bottom of the
cabinet, check that the defrost water drain
opening is not obstructed (see "Defrosting"
section).

TECHNICAL INFORMATION

Fridge Net Capacity lt.
Freezer Net Capacity lt.
Energy Consumption kWh/24h
Energy Consumption kWh/annuo
Freezing Capacity kg/24h
Rising Time
The Technical info are on the rating plate situated on the left inside the appliance.
38
proceed as follows:
D068
A temperature rise of the frozen food packs,
during defrosting, may shorten their safe storage
life.
• If your appliance is still not working properly after
making the above checks, contact the nearest
service centre.
To obtain fast service, it is essential that when you
apply for it you specify the model and serial number
of your appliance which can be found on the
guarantee certificate or on the rating plate located
inside the appliance, on the bottom left-hand side.
205
70
0,805
294
4
20