Remote Control - MetaSystem HomeAlarm C12 Notice D'utilisation

A MANUAL TO AVOID MISTAKES
To fully benefit from the advantages offered by this alarm system, it is necessary to
know how it works.
This is the purpose of this manual: to help the owner of a Meta System HOME ALARM
to use the system correctly by carefully following the explanations given step by step on
the following pages.
PLEASE NOTE
Remind the installer to fill in the table at the end of this manual, identifying the areas
that are protected, but which can be excluded by remote control (see the section PAR-
TIAL ACTIVATION for a full explanation).
WHAT THE INSTALLER SUPPLIES

REMOTE CONTROL

This transmitter makes it possible to switch the alarm system on and off and to control
all its other "comfort" functions.
EMERGENCY KEY
The function of the mechanical key is just to block the bracket of the central unit.
To disarm the system disconnect the mains power supply, remove the C12 central unit
from the bracket and turn the "ON IR - OF-ON" switch to the OFF position.
Caution: store the keys in a safe place.
CODE CARD
These are the transmission codes for some components of the system. It may be ne-
cessary to use them if the system is extended.
Caution: Keep them carefully in a safe place.