Signs And Symbols Used En; Scope Of Delivery; Transport - Binzel BRS LCi Mode D'emploi

BRS LCi PLC
3.4 Signs and symbols used
• The following signs and symbols are used in the operating instructions:
Symbol Description
• Bullet symbol for instructions and lists

Cross reference symbol refers to detailed, supplementary, or further information
1
Step(s) described in the text to be carried out in succession

4 Scope of delivery

• Fully assembled BRS-LCi PLC torch cleaning station
• Anti-spatter fluid (1 liter bottle)
• 1 distance sleeve for gas nozzles with a nominal
diameter of up to 15.5 mm
• 1 distance sleeve for gas nozzles with a nominal
diameter of up to 21 mm
Tab. 12 Scope of delivery
• Wire cutting device (externally controlled)
Tab. 13 Options
NOTICE
• A clamping prism and a reamer are required for the initial set-up and to make the torch cleaning station functional.
These depend on the torch and gas nozzle geometry.
• The DAV comes attached to the BRS. The system operator must provide a suitable control unit. The solenoid valve
required for control is not provided.
Order the equipment parts and wear parts separately.
The order data and ID numbers for the equipment parts and wear parts can be found in the current catalog. Contact details
for advice and orders can be found online at www.binzel-abicor.com.

4.1 Transport

Although the items delivered are carefully checked and packaged, it is not possible to fully exclude the risk of transport
damage.
Goods-in inspection
In case of complaints
Packaging for returns Where possible, use the original packaging and the original packaging material. If you have
Tab. 14 Transport
4.2 Storage
Physical storage conditions in a closed environment:
 Tab. 2 Ambient conditions for transport and storage on page EN-7
BAL.0424.0 • 2019-04-23
Use the delivery note to check that everything has been delivered.
Check the delivery for damage (visual inspection).
If the delivery has been damaged during transportation, contact the last carrier immediately.
Retain the packaging for potential inspection by the carrier.
any questions concerning the packaging and/or how to secure an item during shipment,
please consult your supplier.
• Connection set with non-return valve
• 1 distance sleeve for gas nozzles with nominal
diameters from 16 mm to 19 mm
• Operating instructions
• 5/2 directional valve for controlling the DAV
4 Scope of delivery
EN - 9