sylvac ISP091201D Mode D'emploi page 16

12. Locking of the instrument
Press [MODE] until the display shows « LOC». Then press [SET] to lock the instrument.
If the instrument is locked, the function send data (button [SET]) only is active. A pressure of 5s on a button,
unlocks the instrument.
13. HOLD Mode
Press many times the [MODE] key until the menu «HOLD» is displayed. Then press the [SET] key to switch
«ON» or switch «OFF». Press [MODE] key to validate.
During measurement , press the [SET] key to freeze the value. A «H» appears in the display. A 2nd pression
on the [SET] key reactivate the dynamic value on display.
This function is useful when the display is not clearly in the field of vision.
16