Alarm Functions - TFA 60.2023.02 Mode D'emploi

TFA_No. 60.2023_Anleitung 07.08.2018 8:35 Uhr
MOODLIGHT – Light alarm clock with nature sounds and colour changing mood light
Housing (Fig. 3)
C 1: Speaker
C 3: Battery compartment
6. Getting started
• Connect the supplied power adapter to the alarm clock. Important! Make sure that your household voltage is no more than 240V! Otherwise your
device may be damaged.
• 0:00 and Montag 1.1 (default) appear on the display.
• The device is ready for use.
6.1 Battery
• The CR2032 button cell is a back-up battery to keep the clock operational in the event of a blackout or other power failure.
• Open the battery compartment at the bottom of the device. Remove the battery insulation strip.
• Note: If no battery is inserted, the battery symbol appears permanently on the display.
• Close the battery compartment again.
7. Operation
• Press and hold the + or – button in setting mode for fast mode.
• Press the SNOOZE/LIGHT sensor button in setting mode to return to normal mode.
• The device will automatically quit the setting mode if no button is pressed for 20 seconds.
7.1 Settings
• Press and hold the SET button in normal mode for three seconds to enter the setting mode.
• DEUTSCH (default) flashes on the display.
• Press the + or – button to set the day-of-the week language in the setting mode: GERMAN - DEUTSCH, ENGLISH, SPANISH - ESPANOL and
FRENCH – FRANCAIS.
• If you select English, the display will now appear in English.
• Press the SET button again to do the settings in the following sequence: the button tone (BEEP ON - default), the 12 - or 24 hour system (FOR-
MAT 24 Hr - default), the hours, the minutes, the year, the month and the date, the month/day sequence D/M or M/D (D/M - default) and the
snooze interval (SNOOZE 15 minutes - default). Press the + or – button to adjust it.
• Confirm the setting with the SET button.
7.1.1 24- or 12-hour system setting
• Press the + or – button in setting mode to choose the 12 HR or 24 HR system.
• In the 12-HR system AM (before noon) or PM (after noon) appears on the display.
7.1.2 Snooze function setting
• You can set the snooze interval in the setting mode.
• Press the + or – button to set the desired snooze time – it adds 5 minutes at a time (5 to 120 minutes).
14
Seite 8
C 2: Micro USB port
C 4: Power adapter jack
MOODLIGHT – Light alarm clock with nature sounds and colour changing mood light

7.2 Alarm functions

• This alarm clock provides a light alarm (wake-up light) and an audible alarm. Both alarms can be set for the same time or for different times.
E.g.: The light alarm is set to 06:50 and the audible alarm to 07:00. At 06:50 the white light goes on and it gets brighter gradually; at 07:00, the
audible alarm sound rings.
7.2.1 Light alarm (wake-up light)
• Press the LIGHT ALARM button in normal mode to enter the light alarm mode.
• LIGHT ALM and 6:30 (default), or the last set alarm time, appear on the display.
• Press and hold the LIGHT ALARM button.
• The light alarm symbol will appear and the hour digit will be flashing.
• Press the + or – button to set the hours.
• Confirm with LIGHT ALARM button.
• Set the minutes in the same way.
• Confirm the setting with the LIGHT ALARM button and return to normal mode.
• The alarm is activated.
• When the set alarm time is reached, the simulated sunrise begins with a light which becomes gradually brighter (10 stages in 5 minutes). Waking
up naturally with light has a positive effect on energy hormones.
• If the light alarm is not stopped manually, the wake up light automatically turns off after another five minutes and will be reactivated at the same
set time in the following day. The light alarm symbol remains on the display.
• Press any button to turn off the light alarm or press the SNOOZE/LIGHT sensor button to activate the snooze function.
• SNOOZE appears and the light alarm will be interrupted for the set time.
• The time display counts down the seconds.
• Press any button to turn off the snooze function.
7.2.2 Sound alarm
• Press the ALARM button in normal mode to enter the alarm mode.
• SOUND ALM and 7:30 (default) or the last set alarm time appear on the display.
• Press and hold the ALARM button.
• The alarm symbol will appear and the hour digit will be flashing.
• Press the + or – button to set the hours.
• Confirm with ALARM button.
• Set the minutes in the same way.
• Confirm the setting with the ALARM button.
• BEEP (default) appears on the display.
• Press the + or – button to select the alarm sound. 6 different alarm sounds are available (BEEP, RIVER, W-NOISE, THUNDER, BACKWOODS,
OCEAN)
• The mark in the upper display shows which alarm sound you have selected (BEEP without marking).
• Confirm the setting with the ALARM button and return to normal mode.
• The setting is saved.
• The alarm is activated.
15