Description Of Maintenance And Servicing Work; Spindle; Decommissioning, Storage, Disposal; Storage Conditions - Hoffmann GARANT Xpent Manuel D'utilisation

6.7

Description of Maintenance and Servicing Work

6.7.1

Spindle

Tools / materials required
„ Machine grease
Procedure
➊
Clean the spindle.
➋
Grease the spindle with machine grease.
➌
The spindle is now greased.
7

Decommissioning, storage, disposal

Decommissioning, storage, disposal are activities that are undertaken very seldom.
7.1

Storage conditions

When preparing the clamping system for storage, make sure that the surfaces of the base and the
projecting components are not damaged, and place underlays of wood, rubber or plastic under the
clamping system for protection.
If the clamping system is to be stored for an extended period, clean it thoroughly and apply preservative.
7.2

Decommissioning

X Thoroughly clean the clamping system and apply preservative.
X Cover the clamping system with a sheet to protect it against dust and coarse dirt.
7.3

Disposal

Ensure environmental compatibility, take precautions against health hazards, comply with disposal regu-
lations and your local facilities for correct disposal. Further information is available from your local waste
disposal offices.
Segregate items into metals, non-metals, composite materials and consumables and dispose of them
responsibly.
www.hoffmann-group.com
DE
EN
FR
IT
ES
33