Display Settings - VDO Oceanlink Master Notice D'utilisation

Display settings

Introduction
Display brightness and contrast can be adjusted. The display brightness applies to all masters on the
NMEA 2000 bus and on connected 52 mm gauges.
Adjusting display brightness and contrast
1. From any data page, hold down the button until "Light" appears.
2. If necessary, adjust the brightness level by briefly pressing the button.
Note: if "Light off" appears, brightness cannot be changed since the external lighting is off.
3. To confirm the brightness level, hold down the button until the bar blinks once: "Contrast" appears.
4. If necessary, adjust the contrast level by briefly pressing the button.
5. To confirm the contrast level, hold down the button until the bar blinks once: the last page displayed
reappears.
Tachometer | Operating instruction v. 1.0 | A2C15587700 | 05-2017 | © 2017 Continental Automotive Switzerland AG 31