Black & Decker BHSB315J Mode D'emploi page 9

10. If cleaning task is complete, follow Maintenance
instructions for cleaning and storage.
Fig. I
8
iMPORTAnT: Maximum debris collection will only be
obtained with a clean filter, clean chute and an empty
collection tank. If debris begins to fall back out of the
product after it is switched OFF, this indicates that the
collection tank is full and requires emptying.
• Wash the foam filter, chute and collection tank using
warm soapy water after use and ensure that it is
completely dry before storage.
• It is very important that the filter is correctly in position
before use.
MAINTENANCE
Use only mild soap and damp cloth to clean the vac. Never
let any liquid get inside the vac; never immerse any part of
the vac into a liquid.

WARNING:
completely dry before using it.
iMPORTAnT: To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (other than those
listed in this manual) should be performed by authorized
service centers or other qualified service organizations,
always using identical replacement parts.
Removing and Cleaning the Powered
Scrub Brush (BHSB320JP Only) (Fig. J-L)

CAUTION:
personal injury, turn unit OFF before making
any adjustments or removing/installing
attachments or accessories. An accidental start-up
can cause injury.
1. To remove the powered scrub brush
release button 29 as shown in Fig. J.
2. The scrub brush assembly
and removed.
3. Lift the powered scrub brush
brush cover 31 .
4. Clean the powered scrub brush
nOTE: Ensure the scrub brush assembly
into its locked position before operating.
16
11
28
Make sure the vacuum is
To reduce the risk of
14 depress the
30 can now be lifted up
14 from the scrub
14 , and reassemble.
30 is snapped
5. To insert the powered scrub brush
unit, first insert the scrub brush
cover 31 , then install the scrub brush assembly
back into the unit.
6. The scrub brush assembly
you hear an audible click and the scrub brush cover
31 of the scrub brush assembly
mounting surface.
Fig. J
14
Fig. K
30
Fig. L
31
Cleaning Collection Tank (Fig. M)

CAUTION:
filter 16 are top rack only, dish washer safe. It is
recommended that you manually rinse the collection
tank 8 and pre-filter
top rack of the dishwasher.
1. Pull out the pre-filter 16
nOTE: Pre-filter
16
when removing from the collection tank
English
14 back into the
14 into the scrub brush
30 is secured in place when
30 is flat with the
14
14
Collection tank 8 and pre-
16 before placing them in the
from inside the collection tank
may require extra pulling force
8 .
30
29
8 .
7