Bluetooth (Optional) - Clevo M7X0TU Guide Utilisateur Concis

Concise User's Guide
5. Click to select "My device is set up and ready to be
found", and then click Next.
Figure 22 - Add Bluetooth Device Wizard
6. The Wizard will then search for any available Bluetooth
devices within range.
7. Select the device you want to communicate with, and click
Next.
8. Select an appropriate passkey option and click Next
Finish.
Figure 23 - Passkey Option
38 - Bluetooth Configuration
To Change Settings for the Bluetooth
Device
1. Access the Bluetooth Devices control panel.
2. Click on the device you want to change and click
Properties to:
• Change the name of the device (click General, type a new
name and click OK).
• Enable/Disable a service (click Services, tick/clear the
check box next to the service and click OK).
To Make your Computer Discoverable
to Bluetooth Devices
1. Access the Bluetooth Devices control panel.
2. Click Options, and make sure that Allow Bluetooth
devices to find this computer check box (Discovery)
>
has a tick inside it.
3. Make sure that Alert me when a new Bluetooth device
wants to connect check box (Connections) has a tick
inside it, if you want to be notified when a Bluetooth device
wants to connect.
Figure 24
Bluetooth
Devices
Options