Intel Turbo Memory Module; Intel Turbo Memory (Optional) - Clevo M7X0TU Guide Utilisateur Concis

Intel Turbo Memory Module

eSATA Port Support
Note that the Intel Matrix Storage driver is required to
enable the eSATA port even if you have not included an
Intel Turbo Memory module in your purchase configura-
tion.
Follow the instructions provided here in order to install the
driver.
If you have included an Intel Turbo Memory (Robson)
NAND flash memory card module in your purchase op-
tion, then you will need to install the driver as per the
instructions below (do not install this driver in Win-
dows XP).
Intel Turbo Memory Technology (also known
son flash memory) is an Intel technology that reduces
the time it takes for a computer to boot up, to load appli-
cations, and to write data to the hard drive. Intel Turbo
Memory Technology is supported in Windows Vista only
(it also supports Windows Vista features such as Ready-
Boost, ReadyDrive, and Superfetch).
Intel Turbo Memory & Matrix Storage
Setup and Driver Installation
1. Start-up your computer and press F2 to enter the BIOS.
2. Go to the Advanced menu, select "Installed O/S" and
make sure "Vista" is the selected option.
3. Go to the "SATA Mode Selection" item and make sure
"AHCI" is selected.
4. Select "Exit Saving Changes" from the Exit menu (or
press F10 and Enter) and press Enter to exit the BIOS
and reboot the computer.
5. Insert the Device Drivers & Utilities + User's Manual
disc into the CD/DVD drive.
6. Click Option Drivers (button).
7. Click 4.Install TM&iMSM Driver > Yes.
8. Click Next > Yes > Next > Next.
9. Click Finish to restart the computer.
as
Rob-
Figure 19 - Intel Turbo Memory Console
Concise User's Guide
• Windows ReadyBoost -
uses flash memory as a
hard-drive caching solution.
• Windows ReadyDrive -
uses hybrid drives as a
hard-drive caching solution.
Intel Turbo Memory Module - 34