Reely SKY Micro Notice D'emploi page 41

For better presentation, the canopy of the helicopter
was taken off for figure 7. For this, remove the four
rubber rings from the two retention holts (see figure 8,
item 2).
Lift off the canopy (see figure 8, item 1) of the two
support bolts on the left and the right (see figure 8,
item 2) and pull off the canopy forwards.
Install the canopy in reverse order.
Attention, important!
Before starting to fly your model helicopter, you should take note of the following information first.
Flight operation is only permissible with the canopy attached.
Figure 8
41