Mennekes AMTRON WALLBOX Instructions D'installation page 11

Masquer les pouces Voir aussi pour AMTRON WALLBOX:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
Slide cover down and bolt into place using the screws 2 and the supplied bit insert.
E
Mount the optionally available protective roof (Item No. 18559) using the supplied screws, if required.
F
Feed connection line 5 into the charging station. Mount AMTRON® charging station 6 onto the stainless steel column,
G
using the supplied counter-sunk screws M6 x 20 for this purpose.
 Please observe the corresponding installation manual for the installation of the charging station,
Cleaning after assembly.
MENNEKES recommends cleaning the stainless steel column after assembly with the supplied cleanig cloth. This will
remove possible dirt accumulations which can collect during the installation.
EN
5

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

18559

Table des Matières