Presentation; Dear Customer; Design And Features; Applications - Husqvarna DCR300 Manuel D'utilisation

Dear customer!

Thank you for choosing a Husqvarna product!
It is our wish that you will be satisfied with your product and
that it will be your companion for a long time. A purchase of
one of our products gives you access to professional help with
repairs and services. If the retailer who sells your machine is
not one of our authorised dealers, ask him for the address of
your nearest service workshop.
This operator's manual is a valuable document. Make sure it
is always at hand at the work place. By following its content
(using, service, maintenance etc) the life span and the
second-hand value of the machine can be extended. If you
ever lend or sell this machine, make sure that the borrower or
buyer gets the operator's manual, so they will also know how
to properly maintain and use it.
More than 300 years of innovation
Husqvarna AB is a Swedish company based on a tradition
that dates back to 1689, when the Swedish King Charles XI
ordered the construction of a factory for production of
muskets. At that time, the foundation was already laid for the
engineering skills behind the development of some of the
world's leading products in areas such as hunting weapons,
bicycles, motorcycles, domestic appliances, sewing
machines and outdoor products.
Husqvarna is the global leader in outdoor power products for
forestry, park maintenance and lawn and garden care, as well
as cutting equipment and diamond tools for the construction
and stone industries.
Owner responsibility
It is the owner's/employer's responsibility that the operator
has sufficient knowledge about how to use the machine
safely. Supervisors and operators must have read and
understood the Operator's Manual. They must be aware of:
• The machine's safety instructions.
• The machine's range of applications and limitations.
• How the machine is to be used and maintained.
Local regulations could restict the use of this machine. Find
out what regulations are applicable where you work before
you start using the machine.
The manufacturer's reservation
Subsequent to publishing this manual Husqvarna may issue
additional information for safe operation of this product. It is
the owner's duty to keep up with the safest methods of
operation.
Husqvarna AB has a policy of continuous product
development and therefore reserves the right to modify the
design and appearance of products without prior notice.
For customer information and assistance, contact us at our
website: www.usa.husqvarnacp.com
4 –
English

PRESENTATION

Design and features

Values such as high performance, reliability, innovative
technology, advanced technical solutions and environmental
considerations distinguish Husqvarna's products. Safe
operation of this product requires the operator to read this
manual carefully. Ask your dealer or Husqvarna should you
need more information.
Some of the unique features of your product are described
below.
Replaceable, double sided cutters for
reinforcing bar
When worn on one side the cutters can be rotated 180° for a
new sharp edge. When worn on both sides, the cutter can be
replaced.
Adjustable jaws (DCR100)
The jaws can be adjusted for cutting material with a thickness
of 31 mm to 430 mm.
Replaceable tips (DCR300)
The tips can be removed for welding work or replaced if worn
out.

Applications

!
The tool is intended to be mounted on a machine for carrying
out demolition of concrete constructions, such as walls,
ceilings and floors.
The tools are only to be used together with the machines
listed below.
DXR 310
DXR300
DXR270
DXR 250
DXR 140
The machine is intended for use in industrial applications by
experienced operators.
WARNING! It is prohibited to use the tool for
lifting, pushing, pulling, hammering or
carrying any kind of material.
DCR300 DCR100
X
X
X
X
X