Mounting The Hydraulic Cylinder And The Lift Limits; Mounting The Hydraulic Cylinder; Mounting The Lift Limits - Vicon ANDEX 773 Notice De Montage

EN
Z
Fig. 3-12
Fig. 3-13
14
3.9

Mounting the hydraulic cylinder

and the lift limits
3.9.1 Mounting the hydraulic cylinder
Pull hydraulic cylinder (Z) apart (if necessary,
actuate valve A so that air can flow into the
cylinder (see fig. 3-13) and hook the cylinder into
the brackets on the lifting arm (fig. 3-12). Use the
content of bag L for the above mounting.

3.9.2 Mounting the lift limits

Please observe the marking "Left".
A
Then hook hydraulic cylinder (Z) into the brackets
on the frame (fig. 3-12). Use the content of bag
M.
Mount the lift limit and secure the bolt with the
dowel pins. Use the washers contained in the bag
to compensate play. Furthermore, there are two
positions to which the ring can be mounted in order
to be able to mount the lift limit with little play.
Note:
Please note that there is a lift limit for
the right-hand and the left-hand side.
Attention!
The lift limit must run easily without
getting caught. Check the function of
the lift limit in the turn space position
and the transport position!