Helipede Rotary Windrower Packed In Crate; Taking Apart The Crate; Conneting The Longitudinal Supports - Vicon ANDEX 773 Notice De Montage

Fig. 3-1
3 Helipede Rotary Wind-
rower packed in crate
3.1

Taking apart the crate

Open the crate and take it apart. Lift the parts of
the Helipede Rotary Windrower out of the crate.
Then carefully spread them out on the ground
3.2 Conneting the longitudinal
supports
Screw the three longitudinal supports together with
M 16 screws (R) (fig. 3-1).
Use the content of bag C.
R
R
Danger!
Use suitable tools! They must be
able to carry at least 1000 kg!
Attention!
Observe the torque of the screws!
EN
9