Domo DO7083S Mode D'emploi page 41

CONTROL PANEL
1. on/off indicator
2. descaling indicator
3. empty water tank indicator
4. steam level 1 (low) indicator
5. steam level 2 (medium) indicator
6. steam level 3 (high) indicator
7. on/off button
8. decrease steam level
9. increase steam level
Trigger
Grab the water tank by the handle and pull the trigger with 1 finger. You can now
remove the water tank from the generator.
Filling cap
Open the filling cap and use the opening to fill the water tank.
On/off button
plug in the appliance and press the on/off button. the on/off indicator will light up and
the lowest steam level indicator will start blinking. the appliance is now switched on.
to turn the appliance off again, press the on/off button and hold. the indicators will
go out and the appliance is now switched off.
Setting the steam level
the two arrows can be used to set the steam level: low, medium or high. when a
certain level has been selected, the corresponding indicator will start blinking and will
light up continously after a short while. You can now produce steam and iron with
steam.
Temperature indicator
when the iron is heating up, the temperature indicator will be lit up. when the set
temperature has been reached, the light indicator will go out again. during ironing the
indicator will alternately light up and go out again, as the iron is being kept at the right
temperature.
Steam release button
when you have turned on the appliance and selected the desired steam level, the
indicator of the selected steam level will start blinking. when the light indicator lights
up continuously, you can start using steam. press the steam release button on the
1
4
8
41
DO7083S
2 3
7 9
5
6