Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4. Plug the other connector of the USB cable (type A) into the PC.
▶ The torque module is now powered off the PC. The USB logo
appears on the module's display.
After unplugging the USB cable from the torque module, close the
cover over the USB port to protect it from dirt and dust.
6
Care and maintenance
To help ensure safe and reliable operation, use only genuine Hilti spare
parts and consumables. Spare parts, consumables and accessories
approved by Hilti for use with the product can be found at your local
Hilti Center or online at: www.hilti.com
▶ Keep the product, especially its grip surfaces, clean and free from oil
and grease. Do not use cleaning agents containing silicone.
▶ Clean the outer surfaces of the tool with a slightly damp cloth at regular
intervals.
7
Transport and storage
▶ Prevent damage by transporting and storing the adaptive torque module
in the storage box supplied for the purpose, or in the toolbox of the
impact wrench.
8
Troubleshooting
If the problem you are experiencing is not listed in this table or you are
unable to remedy the problem by yourself, please contact Hilti Service.
Please also pay attention to the troubleshooting information provided in
the operating instructions for the impact wrench used..
Malfunction
The symbols indicat-
ing "Lock module"
are displayed.
The symbols indicat-
ing "Battery temper-
ature too high" are
displayed.
18
English
Possible cause
Torque module
unlocked.
The battery has over-
heated.
Action to be taken
▶ Press the lock button
to lock the torque
module and activate
the impact wrench.
▶ Change the battery or
allow the battery to
cool down.
2124681
*2124681*
Publicité
Table des Matières
