Basic Settings - Hilti SI­-AT-­A22 Mode D'emploi Original

Locking the module
When you have made all your changes you have to relock the adaptive
torque module.
▶ Press the lock button
▶ The selection frame disappears. Your operating parameters settings
have now been saved and cannot be changed accidentally.
▶ The adaptive torque module is locked and the impact wrench is
reactivated.

5.5 Basic settings

5.5.1 Calling up the "Basic settings" menu
1. If it is locked, unlock the torque module by pressing the lock button and
holding it down for at least 1 second.
2. Press the OK button and hold it down for at least 1 second.
▶ The "Basic settings" menu appears on the display.
5.5.2 Selecting functions from the basic settings menu
1. Use the arrow buttons to move the selection frame to the symbol for the
desired function.
Functions in the "Basic settings" menu
Sym- Function
bol
Show the date and time set in the torque module's clock
The AT Documentation Software has to be used to set the
clock.
Show the remaining time / period of use until servicing of the im-
pact wrench is due
Show the percentage of memory used in the torque module
When the reading reaches 100%, the oldest data will be overwrit-
ten.
You can use the AT Documentation Software to export the
logged data and clear the torque module's memory.
Hilti recommends exporting the data and saving the exported
data at regular intervals.
Show the version of the software installed on the torque module
Exit the "Basic settings" menu
2. Press the OK button.
5.5.3 Display showing maintenance status / remaining period of use
After activation of the
period of use of the impact wrench until the next service is shown in the
following display screens.
8 English
.
symbol in the basic settings menu the remaining
2124681
*2124681*