Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8 ENG
Display brightness
The display brightness will automatically adjust according to ambient
light.
In very low ambient light, such as at night, it can be completely off or
low brightness, depending on your setting:
•
Use the switch in the base of the unit to set OFF or LOW.
To check the time when the display is off
•
Tap the top of the lamp cover.
The display brightness will change to low level for a few seconds.
Changing the current time
Bodyclock Spark 100/Bodyclock Glow 150 will keep time for 30 minutes
without power. All other settings are permanently saved.
•
Press and hold
Continue through the following sequence to set the time:
Program
P
Bedside light
Lumie Bodyclock can be used as a fully dimmable bedside light.
•
Use
+
or
-
•
Press and hold
>
until
P
appears.
The hours will flash.
•
-
Use
•
Press
The minutes will flash.
•
-
Use
•
Press
to set the light level.
-
to turn off the light.
+
or
to set the hours.
>
to confirm and continue.
+
or
to set the minutes.
>
to confirm and exit to the current time.
Display brightness
Publicité
Table des Matières
