Lumie bodyclock spark 100 Manuel De L'utilisateur page 11

Maintenance
Maintenance
•
Clean only with a dry or lightly moistened cloth.
•
Replacement mains power adaptors are available from Lumie.
To restore the default factory settings
•
Turn off the power at the mains.
•
Press and hold
•
Release the button when the software version number shows.
LED lifetime
The LEDs in this product have a typical life of 30,000 hours. Although
it's unlikely, it's possible for individual LEDs to fail. This will make only
a negligible difference to light output and you can continue to use the
product.
Warranty
This unit is covered under warranty against any manufacturing defect for
3 years from the date of purchase. This is in addition to your statutory
rights. If possible, use the original packaging (including internal pieces)
to return your Bodyclock Spark 100/Bodyclock Glow 150 for service.
If the unit is received damaged, through misuse or accidental damage,
then we may have to charge to repair it; we will contact you first. Please
contact Lumie for further advice.
> and turn the power back on.
ENG 11