Pentair BLUEFURY LITE Guide D'installation page 11

Adjusting Water Flow to the Cleaner
Incorrect water flow to the BLUEFURY
cause a variety of performance issues. To achieve proper performance,
the BLUEFURY LITE cleaner must operate between 35 - 42 RPMs. See
page 2, "Calculating Cleaner Speed/RPM" for instructions on determining
your cleaner's RPM.
Flow can be adjusted at the wall fitting using the wall fitting valve.
To adjust flow to the cleaner:
1. Using a flathead screwdriver, turn the valve clockwise (to reduce flow)
or counter-clockwise (to increase flow). See Figure 16.
371885 (REV 12/2016)
LITE Pressure Side Pool Cleaner can
®
Turn counterclockwise to
OPEN
Figure 16
11