Warning And Notice Signs; Product-Specific Safety Instructions; Safety Instructions For The Electrical Power Supply - Abicor Binzel xFUME FLEX Mode D'emploi

xFUME FLEX

2.3 Warning and notice signs

The following warning, notice and mandatory signs can be found on the product:
These markings must always be legible. They may not be covered, obscured, painted over, or removed.

2.4 Product-specific safety instructions

Health risk caused by inhaling harmful dust
The device contains harmful dust that can collect on surfaces and penetrate the ambient air as of the first
use. It can damage the respiratory tract when inhaled.
► Check and wear your personal protective equipment.
► Use the device only in rooms with sufficient ventilation.
► The provided filtration system must be used when operating the device.
► Do not open the service door until at least one minute has passed since the device was switched off.
► Keep the device closed during operation and during the cleaning process.
► Immediately remove dust deposits from the environment with a dust class H industrial vacuum cleaner
Fire and explosion hazard due to usage not in accordance with the designated use
The extraction of flammable, aggressive chemical or oil-laden substances and materials as well as dusts
containing aluminum or magnesium can pose a risk of fire and explosion due to chemical reactions.
This may result in serious injuries.
► Use the device according to its designated use only.

2.5 Safety instructions for the electrical power supply

► Ensure that the mains connecting cable is not damaged, for example, by being driven over, crushed
or torn.
► Check the mains connecting cable for damage and wear at regular intervals.
► Use a 16 A fuse to protect the 115 V or 230 V 50/60 Hz mains connector on the mains side.
► Only a qualified electrician should replace the mains connecting cable and the mains plug.
► Splash-water protection and mechanical stability must be ensured when replacing the mains plug
of the mains connecting cable.
► To replace or lengthen the mains connecting cable, use only a rubberized cable of the type
H07RN-F3G 1.5/37028 (230 V) or H07RN-F3G 2.5/37029 (115 V).
► Disconnect the mains plug.
► Wear a respiratory mask.
The extraction arm can be swiveled to a max. of 350°.
WARNING
or a damp cloth.
WARNING
2 Safety
EN - 7