Setting The Time; Brewing Coffee Without The Timer Function - Unold 28465 Notice D'utilisation

SETTING THE TIME

1. As soon as the coffeemaker is connected to the power supply the display
shows 12:00.
2. Press the "PROG" button.
3. The display shows "CLOCK" at the upper right.
Clock
12:00
4. Now press the "STD" and "MIN" buttons until the current time is set.
5. After about 10 seconds with no input the appliance returns to the initial
state; you now see the current time and can start brewing coffee.
6. In case of a power outage lasting longer than about 10 seconds the time is
not saved, which means you have to reset the time whenever the appliance
has been unplugged.

BREWING COFFEE WITHOUT THE TIMER FUNCTION

1. Prepare the appliance as described in the section "Before using the appli-
ance the first time".
2. Open the lid of the appliance.
3. Fill the water tank with clear, cold water for the number of cups you want to
brew, but not past the "Max" marking.
4. Check to make sure that the filter is correctly inserted in the filter holder.
The filter can only be inserted one way in the filter holder.
5. Put the required quantity of ground coffee in the filter. Make the coffee
according to your personal preference; we recommend 5 to 7 grams of
medium-fine ground coffee per cup. Coffee that is ground too fine can clog
the pores in the filter, which can cause the coffeemaker to overflow.
6. Close the lid of the appliance.
7. Pace the pot with the lid closed on the plate.
8. Press the "EIN/AUS" button.
9. The indicator lamp in the "EIN/AUS" button lights up red and the brewing
cycle begins.
10. When the brewing cycle is complete, switch the appliance off by pressing
the "EIN/AUS" button two times consecutively. If you do not push the „EIN/
AUS" button twice after the brewing process has finished, the appliance will
be automatically turned off after 5 minutes.
Copyright UNOLD AG | www.unold.de
27