Krüger & Matz KM0628 Mode D'emploi page 9

Owner's manual
charging
1. Before charging, make sure the headphones has been switched off.
2. plug microUSB cable into the charging port of the headphones; plug the other
side of USB cable into the USB charger, AC/DC adapter or car charger.
3. Red indicator light is ON when battery is charging.
4. When charging is finished, red LED goes off.
Note: Please be sure the battery has been charged fully before first use.
SPecificationS
• Speaker size: 40 mm
• Frequency response: 20 Hz ~ 20 kHz
• Impedance: 32 Ω
• Sensitivity: 105 dB ± 3 dB
• Distortion: ≤0,5% (at 1 kHz)
• Maximum input power: 20 mW
• Bluetooth: 3.0 + EDR
• Bluetooth profiles: HSP, HFP, A2DP, AVRCP
• Bluetooth range: up to 10 m
• ports: AUX-in (3,5 mm), microUSB (charging)
• playback time: up to 7 h
• Talk time: up to 9 h
• Standby time: up to 180 h
• Battery capacity: 250 mAh
• Charging voltage: 5 V / 500 mA
• Built-in microphone
• Microphone sensitivity: -55 ± 3 dB
• Voice call management
9