Aux Input - Krüger & Matz KM0628 Mode D'emploi

Pairing
1. press and hold MFB. The headphones will turn on and automatically enter
Bluetooth pairing mode. Blue LED flashes.
2. Activate your phone (or device) Bluetooth function and search for external devices.
You'll see a list of available devices; find and connect with the headphones (KM
Flow 2).
3. Enter "0000" PIN if necessary.
4. After successful pairing, the headphones will issue a voice prompt.
Notes:
• If pairing is not completed within 5 minutes, the headphones will turn off. In that
case, repeat paring process to pair the headphones with external device.
• Every time the headphones are switched on, they will connect to last connected device
automatically. please note, your device must be on with Bluetooth function turned on.
oPeration
Power on:
press and hold the MFB; blue LED is on.
Power off:
Press and hold the MFB; blue LED is off.
Answering/Ending/Rejecting/Redialing:
press MFB to answer/end an incoming call. press and hold MFB to reject an incoming
call. press MFB twice to redial.
Play music:
• press MFB button to play/pause music playback.
• press prev / VOL + button to go to the previous track. press and hold this button
to increase volume.
• press Next / VOL – to go to the next track. press and hold this button to decrease
volume.

auX inPut

1. Use 3,5 mm AUX cable and connect one end of the cable into the headphones'
3,5 mm input.
2. The headphones will automatically enter AUX mode.
3. Connect the other end into the 3,5 mm input of the device you wish to play music from.
4. Start playing music from your device.
Note: In AUX mode, control panel of the headphones is not active.
8
Owner's manual