Use Instructions - Termozeta faccio io 402004 Mode D'emploi

USE INSTRUCTIONS

WHEN USING THE APPLIANCE FOR THE FIRST TIME
Before using the appliance for the first time, wash all the removable parts with water and
dishwashing detergent, rinse and dry them thoroughly. Clean the motor unit (1) only with a
wet cloth. Never immerse the motor unit (1) into water or other liquids and never wash
it under running water. Consult paragraph CLEANING and MAINTENANCE.
ASSEMBLING/DISASSEMBLING THE APPLIANCE
Always make sure plug (6) is disconnected from the power outlet.
HAND BLENDER
• Assemble the hand blender (12) on the motor unit (1) by making the grooves of hand blender
(12) match with release buttons (5).
• Put the food cut into pieces inside the measuring glass (8) or in another container.
• Put the hand blender (12) inside the container and press one of the two buttons (2) or (3)
(according to the type of preparation) to start the appliance. Do not immerse the appliance
into liquid food beyond 2/3 of the length of the hand blender (12).
• Leave the ingredients cool down before chopping or putting them into the proper glass
(maximum temperature 80° C).
CHOPPER
• Blades (9) are very sharp; be very careful while using the blade unit, especially when
removing it from bowl (10) of the chopper to empty and clean this container.
• Fit the cutting blades (9) into bowl (10).
• Put the ingredients to be chopped inside fitting (10).
• Close bowl (10) by means of union (7).
• Assemble the motor unit (1) to fitting (7) by making the grooves of fitting (7) match with
the release buttons of the motor unit (1).
WHISK
• Assemble whisk (11) and the motor unit (1) by making the gr ooves of whisk (11) match
with the release buttons (5).
• This accessory must be used to beat egg whites and make mayonnaise.
• Press button speed I (2) to start the appliance.
• Never use whisk (11) to knead.
• Suggestion for a better result: use a wide container.
OPERATION
• Make sure the accessories are assembled correctly before enabling the appliance.
• Insert the plug into.
• Press button speed I (2): the appliance will keep on working until the button is pressed.
Button speed II (3) allows increasing the work speed.
Speed I (low speed): for liquid ingredients.
Speed II (high speed): if the ingredients are partly solid.
• When button (2) or (3) is released, the appliance stop.
ENGLISH