Changing The Zoom Position Display - Schweizer eMag 200 Manuel D'utilisation

Changing the Zoom Position Display

Note: The following assumes that you are proceeding from the magnification range. If not, press and hold
the red focus lock button for approximately 10 seconds to open the eMag 200 settings. Then con-
tinue to press the red focus lock button until the magnifying glass icon appears on the screen.
Once you have selected a magnification range, you can choose whether or not the current magnification value
is displayed on the screen as you turn the black magnification dial. Proceed as follows to set your preference:
1. Press the red focus lock button until the magnifying glass icon appears on the screen.
2. Press the button in the center of the black magnification dial to select how magnification values are to be
displayed via the magnifying glass icon.
Zoom Position Display
Positions 1 through 16
Display of current
magnification power
(2.4x, 3.9x, 7.5x etc.)
Without display of
the magnification power
23