WIKA 821 Mode D'emploi page 17

9. Contact protection measures
9.3. Capacitive load
With capacitive loads elevated switch-on currents arise. These can be
reduced by series-connecting resistors in the supply line.
Examples:
Contact protec-
tion measure with
current-limiting
resistor
Contact curve
The hatched area of the contact curve shows the permissible electrical
values for the respective contact.
Accordingly the voltage and/or current to be switched must not exceed
the respective maximum values.
The power to be switched may only lie below the limit curve.
V
V
max
V
min
WIKA operating instructions magnetic snap-action contact model 821
max. voltage
limit curve
A Switching current
min
Contact
Contact
allowed working
range
max. current
A
max
GB
A
17