Detailed Description; Power On/Off; Transmitting And Receiving - HumanTechnik CM-2.4 Mode D'emploi

4. Detailed description

4.1 Power ON / OFF
Slide the ON/OFF switch upwards to switch the
devices on. The LC-display will light up and the
currently selected group number is shown.
To switch the devices off after use: Slide the ON/
OFF switch back to the lower position.

4.2 Transmitting and receiving

Transmission will start as soon as the devices are
switched on. The symbols , »MASTER« und
»TALK« are indicated on the transmitter
The symbol indicates the signal strength.
4.3 Receiver: Volume up / down
The volume can be adjusted through levels 00
(Mute) to 09 (maximum volume).
Press the MODE button. The VOL symbol is in-

dicated on the display. Use the » « and »  «
buttons to adjust the volume as desired .
English 20