Stainless Steel Grease Filter - bora CKAS Notice De Montage Et D'utilisation

Cleaning and Maintenance
GB
First remove the cover plate.
Now put one hand inside the inlet port of
the extractor.
Subsequently press the bottom third part of
the stainless steel grease filter in the direction
of the substructure module.
This tilts inwards now and enables you to
remove it.
Depending on the cleaning requirement, you
can now clean the cover plate and the
stainless steel grease filter in a dishwasher.
After cleaning, you can set up the elements
again in reverse order of the sequence shown
above.
34