Honeywell SmartDrive Compact Guide Rapide page 17

15
Code Parameter
P4.2 Acceleration time
P4.3 Deceleration time
P6.1 AI1 Signal range
P6.5 AI2 Signal range
P10.4 Automatic restart
P13.1 Parameter
conceal
Table 2: Quick setup parameters (Complete parameter list and parameter descriptions
can be found from Complete SmartDrive Compact User Manual available on product
CD or at: http://ecc.emea.honeywell.com/inverter)
Monitoring & Parameters
Min Max Unit Default
0,1 3000 s
0,1 3000 s
0 3
2 3
0 1
0 1
ID
1,0 103
1,0 104
0 379 0 = Voltage 0...10 V
1 = Voltage 2...10 V
3 390 2 = Current 0...20 mA
3 = Current 4...20 mA
0 731 0 = Not used 1 = Used
1 115 0 = All parameters visible
1 = Only quick setup
parameters visible
5-EN
Honeywell
Note