Monitoring & Parameters; Monitoring Values - Honeywell SmartDrive Compact Guide Rapide

13
5. MONITORING & PARAMETERS
Note! Complete parameter listing and descriptions are
given in SmartDrive Compact User Manual, available on
the CD delivered with the product and downlodable at:
http://ecc.emea.honeywell.com/inverter

5.1 MONITORING VALUES

Code Monitoring signal
M1.1 Output frequency
M1.2 Frequency reference
M1.3 Motor shaft speed
M1.4 Motor current
M1.5 Motor torque
M1.6 Motor power
M1.7 Motor voltage
M1.8 DC-link voltage
M1.9 Unit temperature
M1.10 Motor temperature
M1.11 Analogue input 1
M1.12 Analogue input 2
M1.13 Analogue output
M1.14 DI1, DI2, DI3
M1.15 DI4, DI5, DI6
M1.16 RO1, RO2, DO
M1.17 PI setpoint
M1.18 PI feedback
M1.19 PI error value
M1.20 PI Output
Table 1: SmartDrive Compact monitoring values (Complete parameter list and
parameter descriptions can be found from Complete SmartDrive Compact User
Manual available on product CD or at: http://ecc.emea.honeywell.com/inverter)
Monitoring & Parameters
Unit ID
Hz
Hz 25
rpm
A
%
%
V
V
°
C
°
C
% 13
% 14
% 26
15
16
17
% 20
% 21
% 22
% 23
Description
1 Frequency to the motor
2 Calculated motor speed
3 Measured motor current
4 Calculated actual/nominal torque of
the motor
5 Calculated actual/nominal power of
the motor
6 Motor voltage
7 Measured DC-link voltage
8 Heat sink temperature
Calculated motor temperature
AI1 value
AI2 value
AO1
Digital input statuses
Digital input statuses
Relay/digital output statuses
In percent of the maximum process
reference
In percent of the maximum actual
value
In percent of the maximum error
value
In percent of the maximum output
value
5-EN
Honeywell