Makita BV4500-118 Manuel D'instruction page 8

Hook
CAUTION:
Always remove the battery when
hanging the tool with the hook.
CAUTION:
Never hook the tool at high loca-
tion or on potentially unstable surface.
CAUTION:
When hanging the tool with the
hook, hang it carefully. Otherwise, the tool may drop
and cause an injury.
1
2
3
Fig.10
► 1 . Groove 2. Hook 3. Screw
The hook is convenient for temporarily hanging the tool.
This can be installed on either side of the tool.
To install the hook, insert it into a groove in the tool
housing on either side and then secure it with a screw.
To remove, loosen the screw and then take it out.
Installing or removing the mandrel
container
For BV4500-118
NOTICE:
Be sure to install the mandrel container
or the cap to the tool before operating the tool. If
the mandrel container or the cap is not installed
to the tool, the tool will not operate.
To remove the mandrel container, rotate it counter clockwise.
Fig.11
► 1 . Mandrel container
You can install the cap instead of the mandrel container.
Fig.12
1
► 1 . Cap
NOTICE:
2
use the tool only for operations that do not break
3
off mandrel. If the tool is used for operations that
break off mandrels, the broken off mandrels may
cause malfunction of the tool.
OPERATION
CAUTION:
to the moving parts while operating the tool.
Otherwise, you may be injured.
NOTICE:
For BV2200-118
Use the tool only for operations that do not break
off mandrel. If the tool is used for operations that
break off mandrels, the broken off mandrels may
cause malfunction of the tool.
Installing a blind rivet or lockbolt
(with breaking off a mandrel)
For BV4500-118
CAUTION:
becomes full, empty it regularly by removing the
mandrel container. Otherwise, the tool may be dam-
1
aged, and the damaged parts may cause an injury.
CAUTION:
lockbolt into the nose piece, be sure to switch
off the tool. Otherwise, you may be injured with the
tool tip.
CAUTION:
off mandrel from high locations. Doing so may
cause an accident or injury.
8 ENGLISH
When the cap is attached to the tool,
Never bring your hand or face
Before the mandrel container
When inserting a blind rivet or
Be careful not to drop the broken
1