Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
32
33
40
11
39
• Remove the spring (27) from the pin by pushing together the two ends.
• Release the guide bar (41) from the pin.
• Firmly press the saw shaft lock (4), and slowly turn the flange screw (32) clockwi-
se. After max. one turn, the saw shaft lock (4) engages.
• Then undo the flange screw (32), by applying a slightly greater force in a clockwise
direction.
• Fully unscrew the flange screw (32) and remove the outer flange (33).
• Press the unlocking lever to slide back the saw blade guard (6), then remove the
saw blade (7) from the inner flange (39) and pull out in a downwards direction.
• Carefully clean the flange screw (32), outer flange (33) and inner flange (39).
6
7
40
41
4
c
6
Publicité
Table des Matières
