Before Starting The Equipment - Ayce J1X-SM01A-216 Traduction De La Notice Originale

3800 min
-1
5000 min
-1
UNPACKING
• Open the packaging and remove the device carefully.
• Remove the packaging material as well as the packaging and transport bracing (if
available).
• Check that the delivery is complete.
• Check the device and accessory parts for transport damage.
• If possible, store the packaging until the warranty period has expired.
The device and packaging materials are not toys! Children must
!
not be allowed to play with plastic bags, film and small parts!
There is a risk of swallowing and suffocation!
WARNING

BEFORE STARTING THE EQUIPMENT

• The equipment must be set up where it can stand securely, i.e. it should be bolted
to a workbench, a universal base frame or similar. To do this, use the holes which
are located in the machine frame.
- Always clamp workpieces to the saw table.
- Ensure before each cut that the machine is stable!
- If needed, fix the machine to a work bench or the like
- If needed, support long workpieces with appropriate additional supports
• All covers and safety devices have to be properly fitted before the equipment is
switched on.
• It must be possible for the blade to run freely.
• When working with wood that has been processed before, watch out for foreign
bodies such as nails or screws, etc.
• Before you press the ON/OFF switch check that the saw blade is fitted correctly.
• Moving parts must run smoothly.
• Before you connect the equipment to the power supply make sure the data on the
rating plate are identical to the mains data.
3800 min
-1
5000 min
-1
no load speed
12,2 kg
12,2 kg