Ayce J1X-SM01A-216 Traduction De La Notice Originale page 117

between the saw blade (7) and rotary table (16) is 90°.
• Retighten the counternut (d) to secure this setting.
• Subsequently check the position of the angle indicator. If necessary loosen the
pointer (20) using a Philips screwdriver, set to position 0° on the angle scale (19)
and re-tighten the retaining screw.
5
24
Precision adjustment of the stop for mitre cut 45°
• No stop angle included.
• Lower the machine head (5) and secure using the locking bolt (24).
• Fix the rotary table (16) in the 0° position.
• Loosen the set screw (22) and use the handle (1) to angle the machine head (5)
45° to the left.
• 45° - position angle stop (b) between the saw blade (7) and rotary table (16).
• Slacken the counternut (c). Adjust the adjusting screw (31) until the angle bet-
ween the saw blade (7) and rotary table (16) is precisely 45°.
• Retighten the counternut (d) to secure this setting.
1
19
22
20
GB
116 | 117
31
c
7
b
16