Skil PWRCORE 12 Guide D'utilisation page 14

Removable Belt Clip (Fig .7)
Your tool is equipped with removable belt clip,
which can be positioned on the left side of the
tool for convenient transport.
Install the belt clip onto the tool:
a. Remove the battery pack from the tool.
b. Align the rib of the belt clip with the threaded
hole on the base of the tool.
c. Insert the screw and securely tighten the
screw with a screwdriver.
Remove the belt clip from the tool:
d. Remove the battery pack from the tool.
e. Use a screwdriver to loosen the screw that
attaches the belt clip to the impact wrench.
f. Remove the screw and the belt clip.
Install and Remove the Impact
Socket (Fig .8)
Lock the trigger switch "OFF" by placing the
direction-of-rotation selector in the center
position.
CAUTION
portion are not damaged before installing the
impact socket.
To install the Impact Socket:
a. Align the square of the impact socket with
the square drive and push the impact socket
onto the square drive until it locks into place.
b. Tap it lightly if required.
Remove the Impact Socket:
To remove the impact socket, simply pull it off.
WARNING
after prolonged use.
14
Make sure that the impact
socket and the mounting
Use protective gloves when removing the impact socket from the tool, or
first allow the impact socket to cool down. The impact socket may be hot
Fig. 7
Fig. 8
Impact
Socket
Square
Drive
Belt Clip