Safety Agency Compliance Statements; Safety Precautions - Sun Microsystems StorEdge PCI/PCI-X Ultra320 SCSI Guide D'installation

Shielded Cables: Connections between the workstation and
peripherals must be made using shielded cables in order to
maintain compliance with FCC radio frequency emission
limits. Networking connections can be made using unshielded
twisted pair (UTP) cables.
Modifications: Any modifications made to this device that are
not approved by Sun Microsystems, Inc. may void the
authority granted to the user by the FCC to operate this
equipment.
Safety Agency Compliance
Statements
Read this section before beginning any procedure. The
following text provides safety precautions to follow when
installing a Sun Microsystems product.

Safety Precautions

For your protection, observe the following safety
precautions when setting up your equipment:
Follow all cautions and instructions marked on the
■
equipment.
Ensure that the voltage and frequency of your power
■
source match the voltage and frequency inscribed on
the equipment's electrical rating label.
Never push objects of any kind through openings in
■
the equipment. Dangerous voltages may be present.
Conductive foreign objects could produce a short
circuit that could cause fire, electric shock, or
damage to your equipment.
Symbols
The following symbols may appear in this book:
Annexe C Declaration of Conformity, Regulatory, and Safety Information
Caution –
There is a risk of personal injury
and equipment damage. Follow the instructions.
Caution –
Hot surface. Avoid contact.
Surfaces are hot and may cause personal
injury if touched.
Caution –
Hazardous voltages are present.
To reduce the risk of electric shock and danger
to personal health, follow the instructions.
25