KS Tools 160.0015 Notice D'utilisation page 6

Introduction
Dear customer!
Thank you for buying one of our products.
You can find all informations you need in these operating instructions.
Please read the instructions completely and with care. Observe the advices.
The operating instructions are part of the Folding workshop crane. They have to be intact.
The producer is not liable for personal injuries and material damages which result from improper use.
1. Safety and operating information
IMPORTANT: It is important that you read and understand this instruction manual before using your engine crane.
Always ensure its correct use, which will help prevent damage and injury.
2. Specification
While every effort has been made to ensure accuracy of information given in this manual is correct at the time of going
to print, we reserve the right to change specification without nonce.
Lifting capacity position 1:
Lifting capacity position 2:
Lifting capacity position 3:
Lifting capacity position 4:
Maximum lifting height min. jib ext:
Maximum lifting height max. jib ext:
Length of jib position 1 :
Length of jib position 2 :
Length of jib position 3 :
Length of jib position 4 :
Height of frame:
Length of frame:
Overall height:
Width of frame max:
Distance between center of rear wheels:
3. Construction
JIB Locking Bolt
Push / pull handle
Rear casters
WARNING
1000 kg
- Do not overload. Overloading could cause damage or
750 kg
500 kg
- Never use the crane on an uneven floor surface as this
250 kg
- Always lock the legs and jib in position before lifting a
79.1/2"
88.1/2"
- The nuts and bolts supplied with the crane are all high
35.1/2"
39"
- Before each use ensure that all nuts and bolts are
42.1/2"
46"
- Never exceed the safe working loads indicated on the
1/4"
49.1/4"
FAILURE TO FOLLOW THESE INSTRUCTIONS
55.1/8"
COULD RESULT IN LOSS OF LOAD AND/OR
37.1/2"
PERSONAL INJURY OR DAMAGE TO PROPERTY.
23.1/2"
JIB
Hydraulic pump unit
Pump lock /
release valve
Leg locking
pins
failure of the engine
could result in the crane tipping over.
load.
strength and should not be substituted for inferior
types.
correctly fitted and tight.
jib.
Load hook
Front wheels