Mirror Printing Function - Brother P-touch 1950 Mode D'emploi

To change the horizontal alignment setting:
1 While holding down c, press R once, and keep c held down to display the
current horizontal alignment setting.
2 While still holding down c, continue pressing R until the desired horizontal align-
ment setting is displayed.
3 Release c to apply the selected horizontal alignment setting to the entire text.
EXAMPLE
To select the RIGHT horizontal alignment setting:
1
While holding down
and keep
2
While still holding down
R
ing
c
3
Release
This function prints your label so that the text can be read from the adhesive side of the tape. If
mirror-printed labels are attached to glass or some other transparent material, they can be read
correctly from the opposite side.

When using the Mirror printing function, the text should be printed on clear tape.
The default mirror printing setting is OFF.
c
, press
c
held down.
c
until RIGHT is displayed.
.

MIRROR PRINTING FUNCTION

ON
R
once,
, continue press-
A L I G N
L E F T
A L I G N
R I G H T
35